CLUB HAMMERS• Drop forged hardened and tempered head• Fiberglass handle• 2-Tone non slip safety gripItem # Size Handle LengthH003210 3 lb 10"

This HP001GZ Hammer Drill/Driver has a brushless DC motor with high power to weight ratio which generates less heat buildup and is ideal for prolonged use in manufacturing / production applications. It has a variable torque thumb dial with digital...

High quality hardwood threaded tip extension pole for use with any standard roller frame.THREADED 135cm 54"

HS 200LV Solvent Based Clear Penetrating Concrete Sealer HS 200LV Concrete sealer is a premium, high-performance, single-component silane acrylic, 20% solids, low VOC (400 g/L), sealer designed for concrete or any cement-based product. As with most acrylics, it is vapour...

HS 200LV Solvent Based Clear Penetrating Concrete Sealer HS 200LV Concrete sealer is a premium, high-performance, single-component silane acrylic, 20% solids, low VOC (400 g/L), sealer designed for concrete or any cement-based product. As with most acrylics, it is vapour...

  DESCRIPTIONHS 300LV concrete sealers is a premium, high-performance, single-component silane, acrylic (30% solids), and low-VOC (400 g/l) sealer designed for SureCrete overlays or other cement-based products. As with most acrylics, it is vapour-permeable and readily applies outside. However, HS...

  DESCRIPTIONHS 300LV concrete sealers is a premium, high-performance, single-component silane, acrylic (30% solids), and low-VOC (400 g/l) sealer designed for SureCrete overlays or other cement-based products. As with most acrylics, it is vapour-permeable and readily applies outside. However, HS...

Insulated Tarps are a lightweight and effective method of providing temporary insulation on project sites. They are perfect for construction and hoarding. These are 12' x 20', with grommets on the edges for easy tie-downs and are white in colour....

Insulated Tarps are a lightweight and effective method of providing temporary insulation on project sites. They are perfect for construction and hoarding. These are 12' x 20', 4mm thick with grommets on the edges for easy tie-downs and orange in...

This Manual Insulation Fastener has a 1-1/2" Head Diameter.  You would need to drill a 5/16" Hole where you wanted to place the fastener and then hammer the fastener into the concrete using a hammer. The overall length of this...

Insulation fasteners pre-mounted with X-P G2 high-performance nails for fastening mineral wool, EPS, XPS, PIR, PUR, wood-wool and fiber-cement faced boards, to concrete and to masonry.  This insulation fastener has a pin for fastening to concrete and masonry surfaces. Use...

Felton’s Kalsomine Brushes have white Tampico fibers with a 6" wooden handle which makes this a perfect brush for applying liquids and coatings.