DESCRIPTIONMicroTek™ One Coat is a single-component, self-bonding, cement-based, extremely thin overlay for interior concrete surfaces. MicroTek One Coat was designed to yield an exceptionally smooth tight-troweled finish that can provide a new “blank canvas” for decorative concrete floors. It may also be placed...

The Concrete Cleaner SCR™ is a concentrated combination of three commercial-grade cleaning products. SCR™ utilizes a detergent, degreaser, and hydrochloric acid to clean and prepare concrete for overlays, stains, sealers, and coatings. The SCR formula quickly dissolves mortar, scale, rust,...

If you have a concrete countertop, fireplace surround, fire table or concrete shower stall XS-327™ is the sealer you want to be using on your piece. It is a specially formulated two component, moisture-cure, high solids hybrid water based polyurethane coating...

If you have a concrete countertop, fireplace surround, fire table or concrete shower stall XS-327™ is the sealer you want to be using on your piece. It is a specially formulated two component, moisture-cure, high solids hybrid water based polyurethane coating...

HS 200LV Solvent Based Clear Penetrating Concrete Sealer HS 200LV Concrete sealer is a premium, high-performance, single-component silane acrylic, 20% solids, low VOC (400 g/L), sealer designed for concrete or any cement-based product. As with most acrylics, it is vapour...

SureCrete’s XS-Precast concrete counter tops mix is a commercial grade pourable casting mix. Our patented blend is formulated with everything in the bag and is white cement based. Mix one bag of  counter top concrete powder, one-gallon liquid modifier additive, any color of your...

Dura-Kote clear water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system...

Dura-Kote clear water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system...

Powder Stamped Concrete Accent Color Water-Based Stain Eco-Accent™ Eco-Accent is a concrete accent color stain product used for accenting new or faded concrete that can be sprayed on or broomed into the surface. SureCrete’s secondary concrete accent colorant is UV Stable and has 0 VOC’s. SureCrete's Eco-Accent is...

SureTex™ is a cement-based concrete knockdown overlay for both interior and exterior concrete surfaces. It's slightly larger aggregate creates deeper textures, and its chemistry allows quicker surface drying than most overlay products. SureTex™ used with compressed air spray equipment (commonly...

Wall Spray™ is a concrete wall spray overlay that is a cement-based overlay designed for both interior and exterior vertical surfaces. It offers a wide variety of finishes from a simple knock-down to a sophisticated faux Venetian Plaster. WallSpray concrete wall overlay may be applied...

  DESCRIPTIONHS 300LV concrete sealers is a premium, high-performance, single-component silane, acrylic (30% solids), and low-VOC (400 g/l) sealer designed for SureCrete overlays or other cement-based products. As with most acrylics, it is vapour-permeable and readily applies outside. However, HS...