Advantages

- Dries hard and will not attract airborne dirt.
- Excellent penetration into the pores of concrete & masonry.
- Will not change the colour or texture of the surface.
- Prevents freeze and thaw damage.
- Inhibits efflorescence.
- Imparts excellent resistance to acids and alkalis.
- Maintains long term weatherability.
- Exhibits repellency immediately after application.

Limitations

Use in well ventilated areas. Do not dilute Sealox with solvents or thinners. Protect metal, glass, and other surfaces from overspray. Do not use over saturated surfaces or curing membranes.

Technical Data

Flash Point               620F (16.70C)
Shelf Life                  6 months
Density                    6.75 lbs per US gallon (0.81 kg per litre)
Coverage                 (100 - 200 square feet per gallon) depending on porosity.
                                2 - 4 square metres per litre
Solids                      5.5%     

Preparatory Work

Masonry surfaces should be clean and free of surface dirt, dust oil or surface coatings. New concrete should be well cured using water, wet burlap or polyethylene. All joints sealants or caulks should be in place. 

Application

Sealox should be applied by brush, roller or spray in a heavy coat since it’s effectiveness increases with deeper penetration. Vertical surfaces should receive two “wet-on-wet” coats.

The environmental fee for this product is included in the price of this product.

This Product is classified as a Hazardous Materials and needs to be shipped according to the Transportation of Dangerous Goods (TDG) shipping regulations. Because of this, extra shipping charges will be assessed due to the TDG services needed.  This product will have to be shipped on an LTL carrier that has the capabilities to carry out this service.  You will be contacted with the extra charges needed. 

DATA SHEET DOWNLOADS
Sealox TDS
Sealox SDS