Concrete Casting Color for Gray and White Casting Mixes by SureCrete is conveniently pre-measured to individually tint any single XS bag mix. XS Color Packs are pure, synthetic, iron oxide pigments that are UV stable and contain no fillers.

With SureCrete's concrete casting color, having pre-blended, pre-measured bags of color can help lower labor costs as well as increase product consistency. Not having to constantly reformulate color blends every time a new batch is mixed will help to keep all your cast pieces the same color. Having color already pre-blended will help to lower your labor costs in trying to re-formulate oxide pigments to match previous batches. The XS Color Packs are specifically formulated to saturate the Portland cement in our Xtreme Series bag mixes to achieve extremely rich and vibrant colors not typically seen in cast concrete, even white concrete.

Where to Use SureCrete's XS Concrete Casting Color Additive:

• Themed Bathroom Vanities & Sinks
• Integral Kitchen Sinks
• Integral Bath Sinks
• Custom Shower Panels
• Integrally Colored Countertops
• Integral Concrete Casting
• Coordinated Floor & Wall Tiles
• Precast Architectural Pieces
• Custom Themed Furniture
• Three-Dimensional Vibrant Molds
• Making Concrete Pavers
• Casting Pavers

How Do You Apply SureCrete's XS Concrete Casting Color Packs?

XS Color Packs are the easiest products that can be applied:

1. Pour color packs into XS Modifier and mix thoroughly until liquid is a consistent color.
2. Make sure to mix XS bag mix thoroughly until color is consistent throughout the blended mix.

Using XS Color as a Slurry
Estimate quantity of XS Concrete Color Slurry required, allowing for possible future touch-ups.

1. Add a portion of dry XS Color Pack to dry XS Slurry and stir in making sure color pigments are “broken” and mixed in thoroughly.
2. Set aside some of dry mix for possible future touch-ups. 4. Slowly introduce water into Color Slurry and mix by hand or with cordless drill equipped with a jiffy-style mixer, add water slowly to achieve desired slurry viscosity

Note: All colors shown are achieved by mixing one XS Color Pack per one gallon of XS Modifier *(exception for Eucalyptus - created by combining one pack Mountain Shadow and one pack Twilight). Colors displayed are based on a non-color enhancing sealer such as XS-327 Hybrid Urethane Sealer. Do not use this chart as a final selection, for colors are affected by site condition and fabrication procedure. SureCrete recommends making final selections from job specific samples made in the field.

DATA SHEET DOWNLOADS

XS/DFRC Colour Pack Colour Chart