PSC 2099 Bonding Primer is a clear, two component bonding agent for epoxy topcoats for application to smooth, dense surfaces, such as ceramic tile, stone (should contain silicate), smooth new concrete, densifyed concrete, etc. Both components are precisely measured and packaged for on-site mixing and use.
PSC 2099 Bonding Primer is safe to use, its low odor and VOC compliant formula permits its use in occupied areas without concern, and it can be applied in the proximity of foodstuffs. The chemical action of PSC 2099 leaves no film and will not change the color of concrete. Once the surface of application is visible dry, apply immediately, without delay the epoxy top coat as specified.
Uses
- Bonding agent for epoxy topcoats on stone (should contain silicate), ceramic tile, smooth concrete, densifyed concrete etc.
- Interior or exterior applications.
Advantages
- Meets VOC and Leeds requirements.
- Efficient, saves on labor.
- Fast to apply supporting the contractor for quick turnaround time.
- Can be used on new or old substrates.
- Low odor.
- Allows for easy application of safety lines, company logos etc.
PSC 2099 Bonding Primer is designed to
- Prime surfaces for epoxy applications.
- For all PSC epoxy coatings, PSC 2000, 2001, 2100, 2102, 2300, 2301, 2302, 2304 and 2306.
How does PSC 2099 perform?
- The chemical action on surface of the substrate reacts with the epoxy coating bonding it integrally to the substrate.
| VOC | 61 g/L |
| Appearance | Leaves no visible film after application |
| Mix ratio | Mix 20 volumes of Part A with 1 volume of Part B |
| Pot life | Approx. 8 hours |
| Thinning | DO NOT THIN |
| Flash point | N/A |
| Coverage | Approx. 800 sq. ft. per gallon. Depending on the substrate |
DATA SHEET DOWNLOADS
