Description
Now you can repair cracks and spalls to a smooth finish in a fraction of the time it takes with ordinary products. Roadware 10 Minute Concrete Mender is a revolutionary new two-part hybrid urethane for repairing concrete. It’s nearly water thin for deep penetration and it won’t pop out like epoxy because it never gets brittle.
Roadware 10 Minute Conrcete Mender™ is a two-part polyurethane that penetrates deep into concrete to make permanent repairs. Nearly thin as water at less than 9cps, Concrete Mender™ actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender™ eliminates the bond-line as it Microdowels into the concrete. We call it Microdowling™.
Permanent repair in 10 minutes. In just minutes after application, Concrete Mender™ cures to a tough 4500psi polymer concrete that transfers heavy loads throughout the repair area. No more pop outs.
Roadware 10 Minute Conrcete Mender™ comes in a sealed package and will include One Dual Cartridge Of product, 1 Static mixer tube, 1 flow restrictor and 1 retaining nut.
Cures in just 10 minutes at 70°F (21°C) • Works in freezers below -20°F (-28°C) • May be polished • Never gets brittle • Easily applied • Contains no epoxy or polyurea • Easy to mix • Nonflammable • Low V.O.C’s • Paintable • Coatable • Sandable • Meets USDA guidelines.
A dual cartridge applicator gun is required with this product - Sold separately.
Static Mixer Injector with Soft Tip - Sold separately.
10 Minute Concrete Mender should not be allowed to freeze. Because of this, during the winter, extra shipping charges will be assessed due to freeze protect services needed. During these times, this product will have to be shipped on an LTL carrier that has the capabilities to carry out this service. You will be contacted with the extra charges needed.
DATA SHEET DOWNLOADS
10 Minute Application Instructions
10 Minute Concrete Mender Part A SDS
10 Minute Concrete Mender Part B SDS