ECO-STRIP STRIPPER is a 100% biodegradable, VOC compliant coating stripper, containing no hazardous ingredients. It is a safe and effective product to remove paint, and coatings from various substrates.

It is a safe and effective product to remove paint.

Features:
• 100 % Biodegradable (all natural ingredients)
• Environmentally friendly
• Non toxic
• Contain no cancer-causing methylene chloride (DCM), or caustic alkalis (burning of skin         and eyes)

Uses
• Removes concrete sealers
• Removes oil-based, and latex paints
• Removes lead-based paints
• Removes varnishes
• Removes two part epoxies
• Removes urethane paints
• Effective on many surfaces, including wood, metal, concrete, glass, aluminum sidings, tile,
       brick, furniture, equipment, and more.
• ECO-STRIP STRIPPER may be used on vertical as well as horizontal surfaces indoors and
       outdoors.

Limitations
Do not use on plastic, PVC, rubber or dry wall.
PROTECT FROM FREEZING

Product Information
COMPOSITION AND MANUFACTURE :
ECO-STRIP STRIPPER is an organically-derived solvents product. Its very low evaporation rate enables the removal of several layers of paint.

PHYSICAL DATA:

 
ECO-STRIP STRIPPER is packaged in 3.78 liters

First Aid
Avoid eye contact. Use eye protection equipment. Flash eyes with running water for at least 30 minutes. Obtain medical attention. Do not induce vomiting if swallowed. Drink large amount of water. Immediately call a physician. For skin contact, wash with soap and water. Remove contaminated clothing, and if irritation persist call a physician.

Application Instructions
1. ECO-STRIP STRIPPER is ready to use and can be applied by brush, roller or airless
       sprayer.
2. Type of coating and number of layers will determine the amount of time needed for
       ECO-STRIP to work.
3. Check the progress of the stripping action with a scraper to see if the coating has
       softened or lifted from the surface. If not lifted, allow to sit for 10 minutes and recheck
       as necessary.
4. Once the coating is lifted from surface (time required for most coatings is 20-30
       minutes) remove it with a scraper, a stripping tool, deck brush, or rinse off with cold
       medium-high pressure water.
5. Some polyurethane coatings require 1-2 hours stripping time.

Rate of Application
COVERAGE:
       a. Horizontal surfaces- 200 sq. per 3.78 litres.
       b. Vertical surfaces- 140 sq. ft. per 3.78 litres.

DATA SHEET DOWNLOADS

Eco Strip TDS

Eco Strip SDS